AIM AIM 1000
3D illustration from Springs3d Studio, not a manufacturer photo.
Mid-size coiler with feed up to 650 ft/min (about 198 m/min).
Specifications
| Manufacturer | AIM |
|---|---|
| Country | United States |
| Type | CNC spring coiler |
| Status | In production |
| Wire range | 0.46–2 mm |
| Axes | 6 |
| Speed | 650 ft/min |
Specifications compiled from public manufacturer or dealer documentation; they vary by configuration and year. Always confirm with the manufacturer before deciding. Source ↗
Design a spring for this machine
Open Springs3d Studio, add your machine to the library and design with real-time limit checking.
Open in Springs3d Studio
About AIM
AIM (Automated Industrial Motion) of Grand Haven, Michigan builds the AIM 100 through 4000 CNC coiler series, from 0.15 mm fine wire to 20 mm bar.
View brand page →Official website ↗
Frequently asked questions
What wire range does the AIM AIM 1000 run?
Per public documentation, the AIM AIM 1000 runs wire from 0.46 to 2 mm in diameter.
What kind of machine is the AIM AIM 1000?
The AIM AIM 1000 is a CNC spring coiler made by AIM (United States).
Can I design for the AIM AIM 1000 in Springs3d Studio?
Yes. In Springs3d Studio you can register the machine with its limits in your library and design inside its envelope, with warnings when the design drifts out of range.
More resources
Brand names, model names and logos belong to their respective manufacturers and are used for identification only. This catalog is independent and neither affiliated with nor endorsed by the manufacturers.