WAFIOS FUL 16+
3D illustration from Springs3d Studio, not a manufacturer photo.
Ultra-fine-wire CNC coiler of the FUL series, with direct drive on the infeed, the forming axis and the cut.
Specifications
| Manufacturer | WAFIOS |
|---|---|
| Country | Germany |
| Type | CNC spring coiler |
| Status | In production |
| Wire range | 0.12–0.8 mm |
| Axes | 8 |
| Max outside diameter | 20 mm |
| Speed | 260 m/min |
Specifications compiled from public manufacturer or dealer documentation; they vary by configuration and year. Always confirm with the manufacturer before deciding. Source ↗
Design a spring for this machine
Open Springs3d Studio, add your machine to the library and design with real-time limit checking.
Open in Springs3d Studio
About WAFIOS
Founded in 1914 in Reutlingen, Germany, WAFIOS is the world's largest maker of wire and spring machinery. The FUL coiler series and FMU formers are industry references, with intelligent compensation via the iQ software suite.
View brand page →Official website ↗
Frequently asked questions
What wire range does the WAFIOS FUL 16+ run?
Per public documentation, the WAFIOS FUL 16+ runs wire from 0.12 to 0.8 mm in diameter.
What kind of machine is the WAFIOS FUL 16+?
The WAFIOS FUL 16+ is a CNC spring coiler made by WAFIOS (Germany).
Can I design for the WAFIOS FUL 16+ in Springs3d Studio?
Yes. In Springs3d Studio you can register the machine with its limits in your library and design inside its envelope, with warnings when the design drifts out of range.
More resources
Brand names, model names and logos belong to their respective manufacturers and are used for identification only. This catalog is independent and neither affiliated with nor endorsed by the manufacturers.