Torin FZ-11
3D illustration from Springs3d Studio, not a manufacturer photo.
Single-point FZ coiler, minimum index 3, spring body up to 1.75 in.
Specifications
| Manufacturer | Torin |
|---|---|
| Country | United States |
| Type | CNC spring coiler |
| Status | In production |
| Wire range | 0.4–2 mm |
| Max outside diameter | 44 mm |
Specifications compiled from public manufacturer or dealer documentation; they vary by configuration and year. Always confirm with the manufacturer before deciding. Source ↗
Design a spring for this machine
Open Springs3d Studio, add your machine to the library and design with real-time limit checking.
Open in Springs3d Studio
About Torin
Torin, the historic maker from Torrington, Connecticut (later BHS-Torin), built the W-series mechanical coilers and the Z and CNC-11 CNC lines. The brand now belongs to FENN, which builds the FZ and R series and runs rebuild and retrofit programs for the large installed base.
View brand page →Official website ↗
Frequently asked questions
What wire range does the Torin FZ-11 run?
Per public documentation, the Torin FZ-11 runs wire from 0.4 to 2 mm in diameter.
What kind of machine is the Torin FZ-11?
The Torin FZ-11 is a CNC spring coiler made by Torin (United States).
Can I design for the Torin FZ-11 in Springs3d Studio?
Yes. In Springs3d Studio you can register the machine with its limits in your library and design inside its envelope, with warnings when the design drifts out of range.
More resources
Brand names, model names and logos belong to their respective manufacturers and are used for identification only. This catalog is independent and neither affiliated with nor endorsed by the manufacturers.